Bowden cables

On my Regina the Bowden cables were in a bad condition or missing. Until now i never soldered my cables by myself.
So i decided to buy a set of new cables from a known HOREX parts dealer.
The next ones i will try to make by myself if necessary. For this i took the dimensions from the new ones:

Here a advice form Max and Dietmar from the HOREX Forum: Before discard the old cables, test the new ones.

Also to have a set of inner cables and screw-nipples in the baggage, is a good idea.

 

Bowden cables / Brake cable.

Dimensions:
Diameter inner cable: 2mm
Inner cable lenght: 990mm
Outer cable lenght: 820mm

Actuation side:
Barrel: 8x4x9mm
Cable End: 6x3,5x13mm soldered

Regulating side:
Adjustable screw: M7, total lenght: 45mm, thread lenght: 35mm
Cable End: 6x3,5x13mm soldered

 

 

 

Bowden cables / Choke cable

Dimensions:
Diameter inner cable: 1,5mm
Inner cable lenght: 865mm
Outer cable lenght: 755mm

Actuation side:
Cable End: 6,5x4mm (diameter/width) soldered

Regulating side:
Cable End: 3,2x5mm soldere

 

 

Bowden cables / Accelerator cable

Dimensions:
Diameter inner cable: 1,5mm
Inner cable lenght: 980mm
Outer cable lenght: 870mm

Actuation side:
Cable End: 6x5,5mm (diameter/width) soldered

Regulating side:
Cable End: 3,2x5mm soldered

 

 

Bowden cables / Decompressor cable

Dimensions:
Diameter inner cable: 1,5mm
Inner cable lenght: 730mm
Outer cable lenght: 620mm

Actuation side:
Cable End: 6,5x4mm (diameter/width) soldered

Regulating side:
Adjustable screw: M6, total lenght: 32mm, thread lenght: 20mm
Cable End: 5x5mm soldered

 

We use cookies on our website. Some of them are essential for the operation of the site, while others help us to improve this site and the user experience (tracking cookies). You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.